Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is like a stock gasket except it is made out of rubber instead of cork.
This is like a stock gasket except it is made out of rubber instead of cork. Some people swear by them but, we don't think there that great. The only difference is that you can use them more than once.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 111101401B
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 111101401B02
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1107431
There are two types of keepers we like to use.
Application:Part #: 1198092B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101384
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 043101421
Exhaust Valve Guide 9mm
Application:Part #: 311198069FM
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE
Application:Part #: 1198094BWVP
Wiseco 94mm with Valve Pockets Pistons & Cylinders
Application:Part #: 1101475BL
These are just stock valve covers that are chrome.
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1198083
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 113101353BCO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1198159
These rings are cast iron.
Application:Part #: 1101389
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101372
40 HP Barrel Shims .020 (4)
Application:Part #: 1101374
40 HP Barrel Shims .040 (4)
Application:
This is like a stock gasket except it is made out of rubber instead of cork.
