Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a shim that is used between the head and barrel.
This is a shim that is used between the head and barrel. We suggest you only run these on a friday saturday night car. We feel if you plan on putting a lot of miles on your motor the expansion characteristics will cause the heads to come loose after many miles. Now for drag cars and the friday saturday night car they are great. Make sure you take in consideration the thickness for your compression ratio.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1107433
Not our favorite type of piston pin keeps.
Application:Part #: 1101382
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 311198169A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 111101401B
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 021101457
These nuts and washers hold the heads on.
Application:Part #: 1101344
36 HP Barrel Shims .040 (4)
Application:Part #: 1101383
Whether your motor lives or not can depend upon this little shim.
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 11310140108
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1109512
Valve seats are used in the big valve heads.
Application:Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:Part #: 1101481
These are great valve covers gaskets.
Application:Part #: 1109513
Valve seats are used in the big valve heads.
Application:Part #: 1109604
Valve seats are used in the big valve heads.
Application:Part #: 1198094BWVP
Wiseco 94mm with Valve Pockets Pistons & Cylinders
Application:Part #: 1101477BL
These covers look good but have a tendency to leak.
Application:
This is a shim that is used between the head and barrel.
