Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These three pieces of tin go from the heater boxes to the case.
These three pieces of tin go from the heater boxes to the case. Yes, they are important if you are running heater boxes, so don't leave them off. Unfortunately the fit is poor.
Bug (Type 1): 1500-1600
Bus (Type 2): 1500-1600
Ghia: 1500-1600
Thing: 1500-1600
Off-Road: 1500-1600
No customer reviews for the moment.
Part #: 131119358
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 1119027CH
This small fan shroud came on the 36hp motor.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 311119317A
These are also known as the "forget-me-nots".
Application:Part #: 1119317BK
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119516BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119302BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119527BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119302CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119526BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:
These three pieces of tin go from the heater boxes to the case.
