Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts. The straps that we carry are rubber insulated, which allow slight movement in the transmission in order to keep mounts and horns from breaking.
Bug (Type 1): 58-79
Type 3: 64-68
Ghia: 58-74
Thing: 73-74
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111301289
Nose Cone Boot
Application:Part #: 111301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 1301051
High performance street cars or off road cars have been known to crack stock transmission cases.
Application:Part #: 311301343
Sleeve
Application:Part #: 113301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 1301266
Trans Axle Adapter Kit
Application:Part #: 1301263
These mounts made of urethane never wear-out.
Application:Part #: 001301209
Nose Cone Bushing, Front, Late
Application:Part #: 001301207
Nose Cone Bushing, Rear, Late
Application:Part #: 1301184
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 111501131
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 111398005A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 113517191
Swing Axle Fulcrum Plates
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 113301189F
These are the seals that go around the final drives on an IRS transmission.
Application:
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.