Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
This heavy duty side plate keeps the ring and pinion where it's supposed to be. Cars with high horsepower will flex the stock side plate on the ring gear side, not a good thing. This side plate will cure that problem. There's no need to have a heavy duty plate on the non ring gear side of the transmission. This plate isn't something you just slam on because it'll affect your ring and pinion set up. Please take it to someone who knows how to set up ring and pinion.
Bug (Type 1): 61-68
Type 3: 64-68
Ghia: 61-68
Race/Off-Road: 61-68
No customer reviews for the moment.
Part #: 311301265A
These rubber mounts hold the transmission in place.
Application:Part #: 113517191
Swing Axle Fulcrum Plates
Application:Part #: 111301255A
Transmission Cradle Mount Bracket
Application:Part #: 113311123A
This is the main culprit of a noisy transmission.
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 1301265L
Urethane Front Transmission mount with Hardware
Application:Part #: 1301265
These mounts made of urethane never wear-out.
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 211301265AFA
Transmission mount, front, mid
Application:Part #: 111301289B
This boot goes around the nose cone to seal up the hole where it comes through the pan.
Application:Part #: 111501131
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 311301265B
These rubber mounts hold the transmission in place.
Application:Part #: 1301263
These mounts made of urethane never wear-out.
Application:Part #: 211301297
Front Transmission Mount
Application:Part #: 113301263C
These rubber mounts hold the transmission in place.
Application:
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
