Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the seals that go around the final drives on an IRS transmission.
These are the seals that go around the final drives on an IRS transmission. To get the inner one out use a screwdriver to poke it through the seal and pry it out.
Bug (Type 1): 69-79
Type 3: 69-74
Ghia: 69-74
Thing: 73-74
Offroad: 69-
No customer reviews for the moment.
Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 1301184
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 1301265L
Urethane Front Transmission mount with Hardware
Application:Part #: 211301215
This is the front of the transmission that houses the shift lever.
Application:Part #: 113301185A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 211301297
Front Transmission Mount
Application:Part #: 211301265A
These rubber mounts hold the transmission in place.
Application:Part #: 111301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 111301255A
Transmission Cradle Mount Bracket
Application:Part #: 1301049
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 113301263
These rubber mounts hold the transmission in place.
Application:Part #: 001301209C
Nose Cone Seal Holder
Application:Part #: 1301150
Bolt on Center Transmission mount, Urethane stops included
Application:Part #: 113517191
Swing Axle Fulcrum Plates
Application:Part #: 1517122
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:
These are the seals that go around the final drives on an IRS transmission.
