Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This seal keeps the fluid in the converter.
This seal keeps the fluid in the converter. You will need to have the converter out to change the seal. Just pry out the seal. Be careful to drive the seal in straight when installing it.
Bug (Type 1): 70-79
Ghia: 70-74
No customer reviews for the moment.
Part #: 1301050
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 111501131
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 113301211G
This is the front of the transmission that houses the shift lever.
Application:Part #: 1301185
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 113301265E
These rubber mounts hold the transmission in place.
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 1301049
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 113301263C
These rubber mounts hold the transmission in place.
Application:Part #: 211301265AFA
Transmission mount, front, mid
Application:Part #: 311301343
Sleeve
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 001301083
This seal keeps the fluid in the converter.
Application:Part #: 1301150
Bolt on Center Transmission mount, Urethane stops included
Application:Part #: 1311321
These heavy duty gear keys are rated at twice the strength of stock keys.
Application:
This seal keeps the fluid in the converter.
