Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These rubber mounts hold the transmission in place.
These rubber mounts hold the transmission in place. Check your old mounts while the transmission is in the car. To check the rear mounts, take a pry bar and place it between the saddle and bellhousing and pry up. If the transmission moves, the rear mounts are bad. To check the front mount, place the pry bar between one of the forks and the transmission and pry up. If the nose of the transmission moves, replace the front mount. Stick shift movement on acceleration and deceleration are symptoms of a broken front mount. Note: Don't use solid mounts on the street. The noise that's transmitted through the tunnel will drive you crazy.
No customer reviews for the moment.
Part #: 113311113A
This seal goes around the mainshaft.
Application:Part #: 111301257
Transmission Horn Bolt
Application:Part #: 1301150
Bolt on Center Transmission mount, Urethane stops included
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 1517120
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 1301049
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 1311321
These heavy duty gear keys are rated at twice the strength of stock keys.
Application:Part #: 113301189F
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 311301343
Sleeve
Application:Part #: 111301255A
Transmission Cradle Mount Bracket
Application:Part #: 1301265
These mounts made of urethane never wear-out.
Application:Part #: 111398005A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 001301207
Nose Cone Bushing, Rear, Late
Application:Part #: 311301265BFA
Transmission mount, Front
Application:
These rubber mounts hold the transmission in place.
