Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the seals that go around the final drives on an IRS transmission.
These are the seals that go around the final drives on an IRS transmission. To get the inner one out use a screwdriver to poke it through the seal and pry it out.
Bug (Type 1): 69-79
Type 3: 69-74
Ghia: 69-74
Thing: 73-74
Race/Off-Road: 69-
No customer reviews for the moment.
Part #: 1301049
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 311301265B
These rubber mounts hold the transmission in place.
Application:Part #: 001301083B
This seal keeps the fluid in the converter.
Application:Part #: 1301184
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 111398005A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 311301265A
These rubber mounts hold the transmission in place.
Application:Part #: 1301263
These mounts made of urethane never wear-out.
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 311301343
Sleeve
Application:Part #: 111301257
Transmission Horn Bolt
Application:Part #: 1301265
These mounts made of urethane never wear-out.
Application:Part #: 113713145A
The points that are in the shifter that disengage the transmission..
Application:Part #: 001301207
Nose Cone Bushing, Rear, Late
Application:
These are the seals that go around the final drives on an IRS transmission.