Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
This heavy duty side plate keeps the ring and pinion where it's supposed to be. Cars with high horsepower will flex the stock side plate on the ring gear side, not a good thing. This side plate will cure that problem. There's no need to have a heavy duty plate on the non ring gear side of the transmission. This plate isn't something you just slam on because it'll affect your ring and pinion set up. Please take it to someone who knows how to set up ring and pinion.
Bug (Type 1): 69-79
Type 3: 69-74
Ghia: 69-74
Thing: 73-74
Race/Off-Road: 69-
No customer reviews for the moment.
Part #: 113301263
These rubber mounts hold the transmission in place.
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 311301343
Sleeve
Application:Part #: 001301209
Nose Cone Bushing, Front, Late
Application:Part #: 111301257
Transmission Horn Bolt
Application:Part #: 1301263
These mounts made of urethane never wear-out.
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 111301289
Nose Cone Boot
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 113301263C
These rubber mounts hold the transmission in place.
Application:Part #: 113301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 1301265L
Urethane Front Transmission mount with Hardware
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 1517120
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 1301150
Bolt on Center Transmission mount, Urethane stops included
Application:Part #: 1517122
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
