Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is for converting a non hanger case to accept a hanger.
This is for converting a non hanger case to accept a hanger. We don't really like them but in a bind they do work. This adapter is meant for busses 1968-1971. These will only work on engine cases with 8mm oil pump studs.
Bus (Type 2): 68-71
Type 3: 69-74
No customer reviews for the moment.
Part #: 113105245FRS
Rear Main Seal, Double Lipped
Application:Part #: N105001
These are the bolts that hold the engine in.
Application:Part #: 025198009A
This kit contains most of the seals and gaskets necessary to rebuild an engine.
Application:Part #: 113101221B
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: N144031
Some of the most common studs you might need.
Application:Part #: N104701
These are the bolts that hold the engine in.
Application:Part #: 1101211
This chrome stand dresses up your engine.
Application:Part #: 113101219
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 111198003
This kit contains most of the seals and gaskets necessary to rebuild an engine.
Application:Part #: 111101191
25/36 HP Engine Case/ Generator Gasket
Application:Part #: N145431
Some of the most common studs you might need.
Application:Part #: 043101129
This is the washer used under the nuts on cases that use an o-ring on the center main studs.
Application:Part #: 111101123
These pins position the main bearings in the case halves so you can line up the oil galley holes with the main bearings.
Application:Part #: 021101107
Bushing, damper on Main Stud (6 Required)
Application:Part #: 1101131
A case saver is an insert that repairs worn or stripped head stud holes in a case.
Application:
This is for converting a non hanger case to accept a hanger.
