Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man.
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man. These cranks are fully balanced, magnafluxed and micro-polished. Machine work to the case will be required. It has been our experience that if you are going to run an 82mm stroke crank you should run longer rods that are 5.5" in length.
Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 111105271CO
Core
Application:Part #: 111903221S
Replacement Bearings for Serpentine System
Application:Part #: 1105255BK
This is a very nice pulley; the numbers are etched in and do not wear off.
Application:Part #: 1105425
These connecting rods are longer than stock.
Application:Part #: 1105253BK
This is a crank pulley for an upright motor.
Application:Part #: 111198475OS2
Main Bearing Set 1200-1600
Application:Part #: 113105249
This key holds the oil deflector in place as well as aligns the front pulley.
Application:Part #: 311105273ACO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 311105101F
New 1600 Crankshaft
Application:Part #: 1903108BLK
EMPI Serpentine Belt System Black
Application:Part #: 1105254BK
This is a crank pulley for an upright motor.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105271
If your are going to run a 69mm or a 78 mm counterweighted crank, then you will want to have your flywheel 8 doweled or get a flywheel has been 8 doweled.
Application:Part #: 113105245FS
This seal goes behind the flywheel.
Application:Part #: 1105305R
This is a large thrust surfaced gland nut made out of chromoly.
Application:Part #: 113105401ARC
Most people don't realize that these are one of the most important parts in the motor.
Application:
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man.
