Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
This key goes into the crank to align the steel cam gear with the brass distributor drive gear. Note: Install it with a brass drift and make sure it lays flat, this will make it easier to install the gears.
Bug (Type 1): 46-79
Bus (Type 2): 50-71
Vanagon: 80-91
Type 3: 62-73
Ghia: 56-74
Thing: 73-74
Race/Off-Road: 46-79
No customer reviews for the moment.
Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111105719A
Rod Bearings .30
Application:Part #: 1105219
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
Application:Part #: 311105431A
Wrist Pin Bushing.
Application:Bug (Type 1); 1300-1600
Bus (Type 2); 1300-1600
Type 3; 1300-1600
KG; 1300-1600
Thing: 1300-1600
Offroad/Race; 1300-1600
Part #: 1105253BK
This is a crank pulley for an upright motor.
Application:Part #: 113105231B
This gear matches up with the brass gear that is on the crank.
Application:Part #: 111105227
Retaining Clip, 1200-1600cc
Application:Part #: 1105425
These connecting rods are longer than stock.
Application:Part #: 1105251CH
This is a stock pulley that has been chromed.
Application:Part #: 1105169F
Forged 69mm Counter Weighted Crankshaft
Application:Part #: 1105401AC
These connecting rods are longer than stock.
Application:Part #: 311105273AN
VW Flywheel, 200mm 12 volt 15-1600cc Engines
Application:Part #: 113105251G
This pulley on the end of the crank turns the fan belt.
Application:Part #: 111105707A
Rod Bearings .10
Application:Part #: 111105245
This seal goes behind the flywheel.
Application:Part #: 113105241A
This is a large concave washer that goes on the crank after you have the nose bearing on.
Application:
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.