Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a chrome stock bolt and washer that holds the crankshaft pulley on.
This is a chrome stock bolt and washer that holds the crankshaft pulley on. Note: The concave of the washer goes outward. (Inward and the washer will crack.)
Bug (Type 1): 36hp-1600
Bus (Type 2): 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
Race/Off-Road: 36hp-1600
No customer reviews for the moment.
Part #: 1105254BK
This is a crank pulley for an upright motor.
Application:Part #: 111105281
Flywheel Shim 25-36HP, .24mm (0.01")
Application:Part #: 111105227
Retaining Clip, 1200-1600cc
Application:Part #: 113105701
These are the shells that go in the rods and ride on the crank.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105253BK
This is a crank pulley for an upright motor.
Application:Part #: 211105271CRC
These flywheels have been reconditioned and are sold on an exchange basis. This is a rare flywheel so I do not have any in stock. You will need to send in yours first and we can recondition it.
Application:Part #: JC86040
Jaycee Billet 7" Crank Pulley for Street Cars, Red
Application:Part #: 111105271RC
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 1105297
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
Application:Part #: 111105401RC
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 113105209
This is a steel gear that goes on the crank to turn the cam.
Application:Part #: 1105273CH
Lightened 12 lb.
Application:Part #: 113105241A
This is a large concave washer that goes on the crank after you have the nose bearing on.
Application:Part #: 111105263A
The bolt that holds the crankshaft pulley on.
Application:Part #: 1105257
This is a billet, zinc plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:
This is a chrome stock bolt and washer that holds the crankshaft pulley on.
