Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are used cranks with reground rod and main journals.
These are used cranks with reground rod and main journals. Each crank is checked for cracks and wallowed out dowel pin holes. We only grind to 10 under, 20 under and 30 under; any further and the bearings are getting too thick. We also grind on the high side of the scale to insure maximum life out of the crank. A 10 under crank will read 2.155; a 20/2.145, and a 30/2.135. If you mic a used crank and the last number is below a 4, then you shouldn't run it. Example: The reading you get is 2.15382. This is a worn out 10 under crank and should be turned in for a 20 under. All cranks are sold on an exchange basis, cores must be usable.
No customer reviews for the moment.
Part #: 311105431A
Wrist Pin Bushing.
Application:Bug (Type 1); 1300-1600
Bus (Type 2); 1300-1600
Type 3; 1300-1600
KG; 1300-1600
Thing: 1300-1600
Offroad/Race; 1300-1600
Part #: 311105273ARC
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 111105209
CRANKSHAFT GEAR, timing, 36hp engines
Application:Part #: 111105283
Flywheel Shim 25-36HP, .30mm (0.012")
Application:Part #: 111105313A
It's really a bolt, but that's what everybody calls it.
Application:Part #: 111105285
Flywheel Shim 25-36HP, .32mm (0.0125")
Application:Part #: 1105219
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
Application:Part #: 113105401ACO
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 113105231B
This gear matches up with the brass gear that is on the crank.
Application:Part #: 111105233
This gear matches up with the brass gear that is on the crank.
Application:Part #: 1105273CH
Lightened 12 lb.
Application:Part #: 1105251ALBK
Aluminum Stock Crankshaft Pulley Black
Application:Part #: 311105273AN
VW Flywheel, 200mm 12 volt 15-1600cc Engines
Application:Part #: 113105209
This is a steel gear that goes on the crank to turn the cam.
Application:Part #: 113105277
These pins hold the flywheel in place on the crankshaft.
Application:
These are used cranks with reground rod and main journals.
