Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Lightened 12 lb.
Lightened 12 lb. flywheels are great for getting off the line faster or for faster acceleration. They're not good if you do a lot of freeway driving. When picking out a flywheel, you'll need to decide what you're going to be doing with the car. If you're not sure which flywheel you'll need, give us a call and we'll help you with your decision. We've had major problem with new Brazilian flywheels and feel the chromoly ones are much better. Do not run a lightened flywheel on a Bus. Flywheels come 8 doweled.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 111105305E
It's really a bolt, but that's what everybody calls it.
Application:Part #: 1105401A
These connecting rods are longer than stock.
Application:Part #: 1105425
These connecting rods are longer than stock.
Application:Part #: 111105227
Retaining Clip, 1200-1600cc
Application:Part #: 111198461BR
The crankshaft rides in the main bearing.
Application:Part #: 1903108PL
EMPI Serpentine Belt System
Application:Part #: 111105233
This gear matches up with the brass gear that is on the crank.
Application:Part #: 1105271
If your are going to run a 69mm or a 78 mm counterweighted crank, then you will want to have your flywheel 8 doweled or get a flywheel has been 8 doweled.
Application:Part #: 111105283
Flywheel Shim 25-36HP, .30mm (0.012")
Application:Part #: 1105254BK
This is a crank pulley for an upright motor.
Application:Part #: 111105287
Flywheel Shim 25-36HP, .34mm (0.0135")
Application:Part #: 113105249
This key holds the oil deflector in place as well as aligns the front pulley.
Application:Part #: 1105278
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 1105401AC
These connecting rods are longer than stock.
Application:Part #: 1105219
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
Application:Part #: 1903108BLU
EMPI Serpentine Belt System Blue
Application:
Lightened 12 lb.
