Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Whether your motor lives or not can depend upon this little shim.
Whether your motor lives or not can depend upon this little shim. Many people tend to overlook this part, but the shim controls the compression ratio. Compression equals heat and heat destroys motors. Take the time to figure your compression ratio and get the proper shims for that desired compression. Figuring compression ratios and getting the right shims is a long subject, so for help, just call. We find that 99.9% of all engines need barrel shims. Shims are sold in sets of 4.
Bug (Type 1): 1600
Ghia: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1107433
Not our favorite type of piston pin keeps.
Application:Part #: 1198094A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 070198169
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1198092A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101383
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 113101355ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 111198057
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 311198169B92
Piston Ring Set 92mm
Application:Part #: 1107430
There are two types of keepers we like to use.
Application:Part #: 1198163A
These rings are cast iron.
Application:Part #: 1101399
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101392
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101440
This is a shim that is used between the head and barrel.
Application:Part #: 311198069MF
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE FORGED
Application:Part #: 021101457
These nuts and washers hold the heads on.
Application:Part #: 1198087
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:
Whether your motor lives or not can depend upon this little shim.