Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These covers look good but have a tendency to leak.
These covers look good but have a tendency to leak. We suggest using channel style or racing aluminum valve covers. To install see RACING ALUMINUM VALVE COVERS.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1198083
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198160B
These rings are cast iron.
Application:Part #: 1198163
These rings are cast iron.
Application:Part #: 11310140105
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1198162TS
92mm Piston Rings 1.5x2x4 Total Seal
Application:Part #: 1198087
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101374
40 HP Barrel Shims .040 (4)
Application:Part #: 1198092B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198162A
These rings are cast iron.
Application:Part #: 311101353A
New single port head.
Application:Part #: 113101353BRB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 1101392
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198159B
These rings are cast iron.
Application:Part #: 1101391
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101440
This is a shim that is used between the head and barrel.
Application:
These covers look good but have a tendency to leak.