Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These rings are cast iron.
These rings are cast iron. We prefer them over the chrome rings that come in the above big bore kits. It's true that with chrome rings your barrels won't wear as much, but that's because they never seat. We suggest you take the rings off the piston and give them to your girlfriend for bracelets. They're a cheap gift and she won't be around much longer anyway if you don't stop spending so much time on your motor. Be careful putting the rings on, as they can break. Always use spreader pliers. They are sold in sets.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1198094B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101357
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198159
These rings are cast iron.
Application:Part #: 1101393
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101442
This is a shim that is used between the head and barrel.
Application:Part #: 1101386
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 311101353ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1101477BL
These covers look good but have a tendency to leak.
Application:Part #: 111101401B02
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1101355
Here's another long subject, but it'll give you a little something to think about.
Application:Part #: 1101346
36 HP Barrel Shims .060 (4)
Application:Part #: 1101342
36 HP Barrel Shims .020 (4)
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1198090BCH
90.5mm Pistons & Cylinders - 82mm Stroke CHINA
Application:Part #: 1101462KIT
This kit has the correct nuts and washers to hold the heads on the engine..
Application:Part #: 1198161
These rings are cast iron.
Application:
These rings are cast iron.
