Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These mounts made of urethane never wear-out.
These mounts made of urethane never wear-out. The good thing about them is that they don't break; the bad thing is they do transmit more noise through the tunnel. We urge you to use these mounts along with the front and rear transmission straps if you are running a larger motor.
Bug (Type 1): 61-72
Type 3: 64-72
Ghia: 61-72
Thing: 73-74
Race/Off-Road: 61-72
No customer reviews for the moment.
Part #: 311301343
Sleeve
Application:Part #: 113301211G
This is the front of the transmission that houses the shift lever.
Application:Part #: 113301265E
These rubber mounts hold the transmission in place.
Application:Part #: 113311113A
This seal goes around the mainshaft.
Application:Part #: 111301257
Transmission Horn Bolt
Application:Part #: 113517191
Swing Axle Fulcrum Plates
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 1301048
These straps are a good idea if you have a car with a big engine. We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 211301265A
These rubber mounts hold the transmission in place.
Application:Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 113301264
These rubber mounts hold the transmission in place.
Application:Part #: 113701173
This bracket is part of the torsion housing.
Application:Part #: 311301265A
These rubber mounts hold the transmission in place.
Application:Part #: 1301185
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 001301209C
Nose Cone Seal Holder
Application:
These mounts made of urethane never wear-out.
