Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
It caps the hole you are aiming at while pouring oil over everything else. Used ones are fine as long as the gasket is good.
Bus (Type 2): 83-
No customer reviews for the moment.
Part #: 113198031
These gaskets are used on the sump plates of the engine.
Application:Part #: 113117321
Hoover Bit, Oil Cooler Sealing Frame
Application:Part #: 111115107AKS
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: N138171
Oil pressure relief gasket
Application:Part #: 1115422
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111115495
This is more of a bolt than a nut.
Application:Part #: 1115611
Chrome dipsticks come in different lengths and styles..
Application:Part #: 1115106A
This is a great way to increase the oil capacity of your engine.
Application:Part #: 1117024FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1117023
Mesa coolers are the state of the art oil coolers.
Application:Part #: 021115175
This screen fits in the sump around the pick up tube.
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:
