Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
All kits come with pistons, cylinders, rings, wrist pins and clips.
All kits come with pistons, cylinders, rings, wrist pins and clips. Many of the kits will require machine work to the heads and case. Before you buy a kit, you should have a good understanding of how to set the compression ratio. Many people think that bigger motors are unreliable. This is just not true. When a motor is properly designed and built, it can be very dependable. You will not realize the full potential of the bigger pistons, unless you run big valve heads. There is a lot of information needed, so call us and we will gladly help. Note: The only thing we don't like about these kits are the rings and the wrist pin clips.
No customer reviews for the moment.
Part #: 1198162TS
92mm Piston Rings 1.5x2x4 Total Seal
Application:Part #: 1101484
This is like a stock gasket except it is made out of rubber instead of cork.
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1198162
These rings are cast iron.
Application:Part #: 1101393
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198094BWVP
Wiseco 94mm with Valve Pockets Pistons & Cylinders
Application:Part #: 1101477
These covers look good but have a tendency to leak.
Application:Part #: 1107432
Not our favorite type of piston pin keeps.
Application:Part #: 1101481
These are great valve covers gaskets.
Application:Part #: 311198069MF
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE FORGED
Application:Part #: 113101353BCO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1101382
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1198163ATS
94mm Piston Rings Total Seal
Application:Part #: 311198069FM
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE
Application:Part #: 021101457
These nuts and washers hold the heads on.
Application:
All kits come with pistons, cylinders, rings, wrist pins and clips.
