Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
New single port head.
Even those these are new, they do NOT come with a valve job done. The valves are just put in the heads. I know I know, Its just wrong but thats how we are getting them now. I can have the valve job done but that more money.
No customer reviews for the moment.
Part #: 1101382
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198159B
These rings are cast iron.
Application:Part #: 1101440
This is a shim that is used between the head and barrel.
Application:Part #: 1101392
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198094B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101344
36 HP Barrel Shims .040 (4)
Application:Part #: 1101357
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 043101421
Exhaust Valve Guide 9mm
Application:Part #: 113101481F
This gasket goes between the valve cover and the head.
Application:Part #: 1198094BWVP
Wiseco 94mm with Valve Pockets Pistons & Cylinders
Application:Part #: 1198162
These rings are cast iron.
Application:Part #: 1101468
If you have high compression you will need to vent the valve covers into a breather box.
Application:Part #: 311198069F
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 1101448
This is a shim that is used between the head and barrel.
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 113101355A
New dual port head
Application:
New single port head.
