Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a crank pulley for an upright motor.
This is a crank pulley for an upright motor. The pulleys are marked in degrees to assist in timing and valve adjustment. Besides that, they just look cool! Unless you like spending money on rebuilding your motor, NEVER, EVER use a power pulley on your Bug unless this is a drag car or all out race motor. Power pulleys turn the fan slower, which means less cooling and more heat. Neither are good for an air-cooled daily driver motor. These pulleys fit upright motors only.
Bug (Type 1): 36hp-1600
Bus (Type 2): 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
Race/Off-Road: 36hp-1600
No customer reviews for the moment.
Part #: 1105297
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111198461BR
The crankshaft rides in the main bearing.
Application:Part #: 1105169F
Forged 69mm Counter Weighted Crankshaft
Application:Part #: 111105263A
The bolt that holds the crankshaft pulley on.
Application:Part #: 113105271BRC
These flywheels have been reconditioned and are sold on an exchange basis. Currently out of stock of cores. MUST send core before we can ship flywheel.
Application:Part #: 1105402
I-Beam Rod, 5.500", VW Journal 2.165"/55mm (EMPI 3/8" Rod Bolts), Set of 4
Application:Part #: 311105295A
This seal goes in the flywheel.
Application:Part #: 113105701
These are the shells that go in the rods and ride on the crank.
Application:Part #: 113105249
This key holds the oil deflector in place as well as aligns the front pulley.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105305R
This is a large thrust surfaced gland nut made out of chromoly.
Application:Part #: 111105281
Flywheel Shim 25-36HP, .24mm (0.01")
Application:Part #: 1903108RD
EMPI Serpentine Belt System Red
Application:Part #: 113105271BCO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 1105251ALBL
Aluminum Stock Crankshaft Pulley Blue
Application:
This is a crank pulley for an upright motor.
