Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These springs are made for high RPM engines.
These springs are made for high RPM engines. If you plan on revving your engine more then 7k RPMs, use these springs. If you run dual springs, we suggest you run steel push rods. Dual springs are hard on the valve train but is the only way to keep the lifters on the cam at high RPMs.
Race/Off-Road: Set of 8
No customer reviews for the moment.
Part #: 1101353
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198162A
These rings are cast iron.
Application:Part #: 1198092BCH
92mm Pistons & Cylinders set with a 82mm Stroke CHINA
Application:Part #: 1107430
There are two types of keepers we like to use.
Application:Part #: 1101384
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101475CH
These are just stock valve covers that are chrome.
Application:Part #: 1107094VP
94mm Wiseco Pistons -- with Valve Pockets
Application:Part #: 111101461
These nuts and washers hold the heads on.
Application:Part #: 311198169A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 1107434
Not our favorite type of piston pin keeps.
Application:Part #: 1101141
1/2" Longer 10mm Case Studs
Application:Part #: 021101457
These nuts and washers hold the heads on.
Application:Part #: 1107431
There are two types of keepers we like to use.
Application:Part #: 1101393
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 11310140102
If you're rebuilding your own heads, you will probably need guides.
Application:
These springs are made for high RPM engines.