Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are just stock valve covers that are chrome.
These are just stock valve covers that are chrome. They are sold in pairs and come with chrome bails.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 113101355ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1198094B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1109512
Valve seats are used in the big valve heads.
Application:Part #: 1101441
This is a shim that is used between the head and barrel.
Application:Part #: 1107433
Not our favorite type of piston pin keeps.
Application:Part #: 1101474
These covers look good but have a tendency to leak.
Application:Part #: 1101392
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101356
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101386
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198159
These rings are cast iron.
Application:Part #: 1198160B
These rings are cast iron.
Application:Part #: 113101475B
These are good bolt on valve covers. Black in Color
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1101342
36 HP Barrel Shims .020 (4)
Application:
These are just stock valve covers that are chrome.