Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
There are two types of keepers we like to use.
There are two types of keepers we like to use. One is a spiral lock keeper, which locks by overlapping itself. The other keeper is a Tru-Arc clip, which is a clip that has a aquare edge instead of a wire round edge. We highly recommend using either one of these keepers. It's cheap insurance against losing a clip and scarring your cylinder.
No customer reviews for the moment.
Part #: 1101346
36 HP Barrel Shims .060 (4)
Application:Part #: 113101353ERB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 11310140108
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 113101481F
This gasket goes between the valve cover and the head.
Application:Part #: 070198169
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1101441
This is a shim that is used between the head and barrel.
Application:Part #: 311198069F
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 1101353
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1101482EMP
This is the replacement mounting hardware kit for Channel Gasket Style Valve Covers.
Application:Part #: 1198083
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101391
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101396
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198160B
These rings are cast iron.
Application:Part #: 1101384
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101389
Whether your motor lives or not can depend upon this little shim.
Application:
There are two types of keepers we like to use.
